Badland winch can pull off your truck from fallen trees and boulders. If you go off the road accidentally and get stuck somewhere, it’s the only thing you’ll remember first.
However, it works with the help of a remote. But remote isn’t always the regular thing you keep with you. And, if you don’t have it at that time, you’ll be at your wit’s end.
For severe conditions, you must know how to use a badland winch without a remote. It’s about some easy steps to follow to haul your vehicle from the pit. Here are some step-by-step guides to using a badland winch without a remote.
How To Use Badland Winch Without Remote
Here you can see how a badland winch hauls a vehicle without a remote.
Step – 01: Prepare Your Winch Cable
You’ll need to extend the winch cable to ensure smoothness when preparing the winch. The line is pre-stretched to eliminate the weak areas.
Start by unwinding the rope entirely. Leave at least five wraps on the drum. Locate a safe anchor point and gently draw your vehicle.
Step – 02: Set Up the Pull
The anchor point must be robust enough to withstand the force of winching. Make an anchor point straight with the vehicle’s movement direction.
Hooking is the most crucial thing in this stage. For the most significant force, make sure you hook the cable at the lowest place. The winch will pull your truck with maximum power, and the rope will wind onto the drum smoothly.
Step – 03: Pull Out Wire
Maintain pressure on the wire as you stretch it to your anchor point. Ensure it doesn’t tangle. Attach the wire rope to the anchor point with a strong knot.
Step – 04: Make Sure the Winch Line Has a Damper
A winch wire may break due to friction while winching. Put a damper in the middle of the cable, between the anchor point and the winch. It’ll reduce pressure during winching.
Set the damper from a blanket to a garment to a tree branch, as it’s heavy. Before the cable wrap enters the roller head, make sure it’s removed.
During the winching process, you mustn’t replace the cable wrap until the pressure has been released. Before restoring the cover, remove the stress if it falls off.
Step – 05: Cable Tensioning
Stretch the cable before beginning the natural pull. Start the winch and steadily pulsate it until the desired stretch is reached.
Keep a close look at the cable during the winching procedure to ensure it smoothly winches onto the drum.
Step – 06: Engaging Your Winch For the Pull
Start pulling once you’ve correctly set up the winching process. When winching, hardwire the switch with three wires and confirm it will activate the winch motor.
During the process, anything can happen. Excessive tension on a cable might cause it to break. You must remain in a safe zone around the winching area for safety.
Keep an eye out for passing people or animals to ensure that they aren’t injured if something goes wrong.
Step – 07: Start the Pull With a Safety Zone
Before winching, double-check the cable wrap. In the middle of the cable, the winch cable will reach a mild tension state.
As you won’t be utilizing the remote, start the car from the side. Slowly begin the winching procedure by carefully turning on the winch engine with a manual switch.
If you take up the cable slack too rapidly, the rope may jerk. The winch and the line may be stressed if the operation is resumed too quickly.
Step – 08: Complete The Winching In a Proper Way
Continue to winch until the vehicle moves out after the cable is under stress. Start slowly and gradually winching for no more than two minutes per pull.
Your vehicle’s electrical system and the winch will be strained if you go for more than two minutes. Between one-minute pulls, take a little rest to allow the battery to recharge and offer maximum pulling force.
Step – 09: Verify Pulling Result
The winching process is finished once the vehicle is on solid ground and driven safely. Reduce the pressure and shift the truck in park gear. Then set the parking brake to stop the winching procedure.
Now, switch off the motor, and disconnect the wire from the anchor point. Make sure the line is untangled.
Step – 10: Rewind the Cable Wire
You’ve safely removed the vehicle up to this point. Now, it’s time to pack your belongings. Rewind the wire cable to the winch drum first.
However, though the procedure seems easy, you must proceed with caution. If the winch line becomes tangled during the process, it may cause issues during the next winching.
Avoid getting your fingers pinched when winding adjacent to the roller head. You must be very careful when you rewind the wire cable.
Things to Remember Before Using Badland Winch Without Remote
Here are a few tips to help you winch your vehicle. Ensure that the following things happen during the pulling process.
- The winch cable should be firmly coiled around the winch drum.
- Check if the line pulls on one side or the other.
- Jerk should be avoided throughout the winching process. Otherwise, they may put too much pressure on the cable and cause it to break.
Frequently Asked Questions
- Do I need a remote for the winch?
Winching is possible without a remote, though, but the procedures become easy if you have the controller. When you want to control your winch from a distance, a remote is a must-have.
- How do I activate my winch with a remote?
Press the button on the remote control to start picking up the vehicle. You’ll feel your car moving forward as you get out of the trap. Release the button every few seconds to resume winch operation. It’ll avoid the fast-moving of your vehicle.
- Should the winch pull from the top or bottom?
The cable should always pull from the bottom of the drum. A minimum of 8 wraps is needed at the drum for all winching.
- Can I make my winch wireless?
A remote control system makes your winch wireless. You can haul vehicles from up to 500 feet away via remote. The two-person job turns into one while using a remote on your badland winch.
Conclusion
Running a winch without a remote can be challenging. However, it’s possible now as you know how to use a badland winch without a remote.
The benefit of having a remote in your vehicle is always good. Yet, if you don’t have the remote at a specific time, the guidance above will come in handy.
